Description
BASIC MACHINE
BASIC MACHINE LUMINA 1586 premium with belt bridge
TECHNICAL SPECIFICATIONS
LUMINA 1586 (belt bridge)
Edgebander for edging and post-processing of panel-type materials
Edging thickness, rolled edging: 0.4 – 3 mm
(depending on material)
Edging thickness, strip edging:
8 mm (Glu Jet – for 1586 grooving / flex)
15 mm (Glu Jet – for 1586 premium)
Edging height: max. 65 mm
Workpiece thickness: 8 – 60 mm
Workpiece width: min. 60 mm
Workpiece length: min. 140 mm
Feed rate: infinite 10 – 25 m/min.
ELECTRICAL
Electrical for variable feed 400 V / 50 Hz, 2.2 kW
Edge Control 19
with 18,5″ color touchscreen 16:9
Powerful controls and simpliest machine operation for efficient machine setup and re-setting.
Rotatable and tiltable operating control at eye level with Windowslike user interface, all information is displayed in plain text and/or graphics, with extensive program store.
External USB-interface
ECO MODE+
This power-saving mode is an automatic stand-by mode, which puts all drives out of operation as soon as no workpiece is entered into the machine. The motors correspond to the new energy efficiency class IE2. If a workepiece is not entered into the machine over a longer time period (6 minutes) the heater of the glue application system automatically shuts down. No more energy is consumed by the machine.
INFEED AREA
Infeed fence long (1492 mm) incl. support with integrated rollers
Infeed fence long for precise feeding of very long work pieces, easy adjustment to adjust the cutting depth during joining
PRE-MILLING UNIT
Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 min-1)
With 2 trimming units for joining panel edges
1x operating in forward direction, 1x in rearward direction max. milling thickness: 3 mm, patented ProLock screw-in clamping system for rapid tool change
Diamond cutter Ø 70 x 64 x 30 mm, 2 teeth, left hand For pre-milling unit 1801 / 1802
Diamond cutter Ø 70 x 64 x 30 mm, 2 teeth, right hand For pre-milling unit 1801 / 1802
EDGE FEEDER
Edge feeder 1901 SYNCHRO
automatic transport of roll and strip products max. load capacity: 150 mm
Synchronous drive with adjustable edge protrusion for cut length edging, for coils: max. edge thickness 3 mm (material dependent) forward cut up to max. 65 mm (material dependent) max cross section 135 mm² (material dependent) support table for coils Ø 820 mm
LASER EDGE EXCHANGE UNIT
Laser Edge Unit Ltronic LT702
Electronical controlled unit for the activation of the functional layer on laser edges
Including laser edge library. The library includes the most common coextruded and coated laser edges which can be selected easily from the operator through the standard touchscreen.
Incl. change carriage
Incl. quick-change coupling device
Incl. HSK adapter for the aggregate
Incl. automatic aggregate recognition
Incl. water cooling system
Incl. electronic controlled air blower
Incl. voltage stabilizer
(for power grids without neutral conductor and for special grids a isolating transformer is necessary- on request)
Panel height with standard NIR Module = 8 – 23 mm
Edge thickness max. 3 mm
6 kW max. load
GLUE APPLICATION (EXCHANGE UNIT)
Glue application system Glu Jet GJ301 automatic
(2,3 kW, 50 Hz)
Automatic adjustment of gluing height (tracing nozzle)
Glu Jet hybrid technology
Processing of EVA and PUR adhesives
Adhesive in cartridge or granules form
Processing of neutral and coloured adhesives
Glue applied by means of nozzle technology
Heat-up time: 3 minutes
Incl. hopper for cartridges: 4 cartridges (approx. 1,4 kg)
Incl. hopper for glue granules: (approx. 1,5 kg)
Incl. automatic reloading of glue
Incl. automatic rinse function directly at the control panel through separate rinse channel
Automatic glue temperature reduction according to time
GLU JET rinse hopper
to collect glue residues during rinse procedure
PRESSURE UNIT
Pressure section 1914-1 MOT
Motorical adjustment to the edge thickness directly from the control panel, with 4 sep. contact-controlled pressure rollers for clean edge pressing on carrier panel, first roller
automatic driven synchronous to the feed speed, 3 support pressure roller
END TRIMMING UNIT
End-trimming KA 701 pneumatic
(2 x 0.65 kW, 200 Hz, 12,000 min-1)
Pneumatic pivoting feature 0/10° for coils and strips:
max. edge thickness: 20mm (depending on material and feed speed), hardened and precision-ground linear guides each, incl. 2 noise reduced TC-sawblades altern. teeth, Ø 110 mm, Z 20, incl. 2 extraction hoods
FLUSH TRIMMING
Trimming unit 1828 (2 x 1.1 kW, 200 Hz, 12,000 min-1) for flush trimming up to 15 mm thickness
max. panel thickness: 60 mm, for flush trimming, HW-knifes with CM-technology (System Leuco), Ø 70 mm.
Air Stream System, cutting width 16 mm, Z = 4, patented ProLock screw-in clamping system for rapid tool change, with integrated chip removal, incl. blow nozzles
MULTIFUNCTIONAL TRIMMING UNIT
FR701 Cutter unit
100% repetition accuracy at the touch of a button based on zeroclearance mechanisms and 6 fully digital NC servo-axes.
Heavy duty floor-mounted machine with shock-absorbing mounts and large sensing rollers for perfect results even at high feed rates.
Machine adjustments on linear guides with central lubrication. With standard blast nozzles in front of sensing rollers to blow away chips in front of sensing areas.
Horizontal sensing with angular sensing rollers with chemically applied nickel plating developed especially for processing modern, high gloss edging.
AirStream System Diamond cutter Ø 71,5 mm x 15,5 mm, Ø 16 mm Z = 2 18000 rpm R = 2,0 mm left hand For trimming unit FR701
CORNER COPY UNIT
Form trimming unit FF701
100% repetition accuracy at the touch of a button based on zeroclearance mechanisms and 4 fully digital NC servo-axes.
Includes two diamond tipped cutters with optimized chip removal. With automatic pendulum sensor for perfect copying results. Fully automatic pendulum sensor copies ends without material protrusion and leaves the optimum edge protrusion for the longitudinal edge for subsequent machining.
Machine adjustments on linear guides with central lubrication. With standard blast nozzles in front of sensing rollers to blow away chips in front of sensing areas.
Including shelf program for optimum processing of shelves with rounded edges.
Diamond coated cutter Ø 72,5 mm x 19 mm, Ø 20 mm, Z = 4 R = 2 mm, left hand with CM technology (LEUCO system) incl. integrated chip removal and patented ProLock tool
connector for fast and precise tool changing for form trimming unit FF701 / 1833
Diamond coated cutter Ø 72,5 mm x 19 mm, Ø 20 mm, Z = 4 R = 2 mm, right hand with CM technology (LEUCO system) incl. integrated chip removal and patented ProLock tool connector for fast and precise tool changing for form trimming unit FF701 / 1833
SCRAPER UNIT
Scraper unit ZK701
Heavy duty floor-mounted machine with shock-absorbing mounts and large sensing rollers for perfect results even at high feed rates.
Machine adjustments on linear guides with central lubrication. With standard blast nozzles in front of sensing rollers to blow away chips in front of sensing areas.
100% repetition accuracy at the touch of a button based on zeroclearance mechanisms and 6 fully digital NC servo-axes.
Including high gloss package for exact adjustment of tool depth when using high gloss panels with protective foil as well as sensing rollers with chemical nickel plating.
TCT turnover knifes for scraper knife bottom ZK701 19x12x2 mm R = 2.0 mm TCT turnover knifes for scraper knife top ZK701 19x12x2 mm, R = 2.0 mm
SURFACE GLUE SCRAPER
Surface glue scraper 1964 scraping out superfluous glue for a clean glue line Plunge-in controlled top and bottom separately, incl. 2 blow nozzles, incl. 2 turnover knifes, incl. dust extraction hoods
BUFFING
Buffing unit 1944K (2 x 0.2 kW, 400 V, 1,400 min-1) For edge cleaning and polishing, incl. plunge-in control, incl. 2 textile buffing wheels
SPRAYER UNIT
Sprayer unit 1856 for the in- and outfeed area
for the infeed area: electronically controlled release agent sprayer with release agent
for the outfeed area: electronicaly controlled cleaning agent sprayer with cleaning agent
EQUIPMENT VARIANTS AND ACCESSORIES
LED-Lamps (4 pc) for the infeed area / post-processing area
Modern LED technology with hardened and break-resistant glass
Automatic lubrication of the transport chain
Intelligent automatic transport chain lubrication. Sensor-controlled unit, for metering lubricate to match load.
Adaptive pressure and glue quantity control
automatic, program controlled fine adjustment for optimum adjustment to edge thickness, edge materials and glue types which guarantees best process results. Automatic package consists of:
– automatic glue quantity control
– adaptive guillotine – automatic pressure section
NESTING PACKAGE
Nesting tracer shoes vertical for bottom
for 2 trimming units and radius scraper
Tracer shoes vertical at the place of the copy rollers for the bottom units. In case of hinge holes or other similar holes in the workpiece and additionally for peak or trapezoidal workpieces. The workpieces must be entered in the machines with the holes at the bottom side.
Reviews
There are no reviews yet.